Tuning Receiver For DD Direct Plus

Tuning the digital set top box as below for get the channels from DD Direct Plus.

Press "Menu" button on the remote control.The "Main Menu" will appear.Select "Program Setup" from the"Main menu 'by using "CH+ or CH- " button on the remote control.Press on "OK" button.The "Program Setup" menu Will appear.

Select "Add New Program" from the list and press "OK" button on your remote."Add New Program" window will appear.

Change the LNB frequency as 9750 by using the VOL+,VOL-.CH+,CH- button and numeric keys on your remote control.Enter the Frequency,Symbol rate and set the polarity as Vertical."Off" the "22Kh" switch.If you use a DISEqC switch(switch used to connect more than one LNB to the digital receiver) ,select the correct port .It can select any port of the DISEqC or select "Off" DISEqC switch ,if you are not using a DISEqC switch.Select "All" or "Free" from the scan option.If you want the signal of scrambled channels or pay channels(the picture cannot receive) with free channels select "All" from the scan option,if you don't want signal of scrambled channels and only want free channels ,select "Free"from the scan options.Press on"OK" button for tuning the channels .Wait for the tuning.Press on"Exit" button to exit from the "Menu".All channels that you tuned, saved automatically at the end of your channel list of the digital receiver.