Mega TV channels are the only channels that are
available through Intelsat 17 at 66 east in Mpeg-4 compression and DVB-S standard. We recommend to buy a Mpeg-4 receiver with DVB-S2 standard. Because most of the channels transmitting through
Intelsat 17 at 66 degree east are using Mpeg 4 compression with DVB S2 standard.
So you have need an Mpeg-4 receiver with DVB S2 standard to receive these channels .Mpeg-4 receivers
with DVB-S technology are also available in the market. Make sure that you
bought an Mpeg-4 receiver with DVB S2 standard.
Technical parameters to receive Kalaignar channels are given
below
Satellite: Intelsat 17 at 66 Degree East
TP Frequency: 3845
Symbol Rate: 27692
Polarization: Vertical
Signal Compression: Mpeg-2
Standard: DVB-S
Note: It is better to buy a Mepeg 4 receiver with DVB S2 slandered and HD (High Definition) technology. This receiver cost about 500 rupees more than the DVB S2 Mepeg 4 receiver. HD is the new technology and if the transmission is change to HD mode it can use the same receiver to get the channels. Otherwise it wants to spend more amounts to buy a new HD receiver.
If this article is useful please comment and you can also
comment about your doubts in this matter to get a reply.
Note: It is better to buy a Mepeg 4 receiver with DVB S2 slandered and HD (High Definition) technology. This receiver cost about 500 rupees more than the DVB S2 Mepeg 4 receiver. HD is the new technology and if the transmission is change to HD mode it can use the same receiver to get the channels. Otherwise it wants to spend more amounts to buy a new HD receiver.
No comments:
Post a Comment